Standard Printing
OPERATION
Standard Printing
ClThe leading edge margin of the paper must be more than 5 mm, 1/5”, because ifthere
is no margm on the paper, the paper might be misfed, or might become di~. If there
is no margin on the original, adjust the image position by pressing the Image Position
key. See page 24.
~ Set the original straight. Ifyou set the ori inal obliquely, the original will be fed obliquely
3
and the original image may be distorte .
r
Important
The stack should not exceed 6 sheets of normal thickness paper.
I
Caution: While printing, do not move the paper delivery rollers. Otherwise, the drum maybe
damaged.
1. Adjust the original guides to the size of
the original.
2.
Insert the original face down in the
ADF until it stops.
IJ *Do notinsertdifferentsize originalsat the
same time.
~ The fed original may not be delivered
completely from the ADF until the next
original isfed.
3*
Using the Number keys, enter the number of prints required.
fJ Up to 9999 printscan be entered at one time.
0 To change the number entered, press the Clear key and then enter the new number.
19
