OPERATION
Cautions When UsingThe Document Feeder
Cautions When Using The Document Feeder
Only use originals that meet the following specifications:
Size:
Max.: 216 mm x 356 mm, 8.5” x 14.0”
Min.: 90 mm x 140 mm, 3.5” x 5.5”
Weight: 64 g/mz -104.7 g/mz, 17.0 lb -27.9
lb
Cautions:
IJ Remove paper clips or staples from the originals.
IJ If you use paste-up originals, make sure the pasted parts are adhered firml to the
Y
base sheet. If the thickness of the paste-up original is more than 0.1 mm, 1250”, a
shadow may be printed on the paper.
fJ Correct curled or bent originals to prevent misfeeds.
~ If you use curled orfolded originals, the image on the prints will be distorted, especially
for straight lines. The machine oannot correct curls or folds in originals.
IJ If there is a large solid fill ima e on the leading edge of the ori inal, paper misfeeds
8 \tend to occur. In that case, shi the image position backward wit the Image Position
key (See page 24).
~ For the following types of originals, make a copy and use the copy as an original.
C3carbon mated originals
= Bent or damaged originals
= Originals with glue on them
= Originals with bindingholes
~ The first 5 mm, 1/5” of the leading ed e and the last 1 mm, 1/25” of the trailing ed e
3 !cannot be printed. Make sure the lea in edge margin is at least 5 mm, 1/5” and t e
8
trailing edge margin is at least 1 mm, 1/ 5“.
Original
5 mm
1 mm,
1/5”
1/25”
*
14
