When Nozzle Clogging Cannot Be Solved
4-21
1
1
1
4
Routine Maintenance
5
Open the left maintenance cover.
(1) Turn four screws that fix the maintenance cover to
the left, and remove them.
(2) Remove the maintenance cover.
• If the maintenance cover is hard to remove, use the
supplied screwdriver.
6
Immerse Wiper for CR in Maintenance kit.
7
Wipe the nozzle surface from the rear of the main
body to the front twice or three times with Wiper
for CR immersed in Maintenance kit.
• Do not rub too strong.
8
Press the key after the cleaning.
9
Close the left maintenance cover then press the
key.
• After its initial operation, the machine returns to step1.
10
Perform head cleaning. ( P.2-22)
11
Perform test printing. ( P.2-20)
• Immerse much enough so that washing
liquid may drip from it.
• Do not wipe the nozzle surface with dry
Wiper for CR.
• If Wiper for CR has fluffed, replace it.
• If ink solid adheres to Wiper for CR,
change the surface to use for cleaning or
replace it.
Screw
Screw
Maintenance
cover
Rotate it left.
Close cover
COMPLETED [ ENT ]
