Timer Settings
53
2
❖ Scanner Auto Reset Timer (scanner)
Specifies the time to elapse before the scanner function resets.
• On
•Off
If [Off] is selected, the machine will not automatically switch to the user code
entry screen.
The time can be set from 10 to 999 seconds, using the number keys.
The default setting is 60 second(s).
❖ Set Date
Set the date for the copier's internal clock.
To change between year, month, and day, press {W} and {V} key.
Enter the year, month, and day using the numeric keys.
If you set a future date by mistake, printing and initializing might be delayed.
If a delay occurs, simply leave the power on and wait about ten minutes.
❖ Set Time
Set the time for the copier's internal clock using the number keys.
Enter time in the 24-hour format (in 1 second increments).
To change between hours, minutes and seconds, press {W} and {V} key.
❖ Auto-Logout Timer
Specify whether or not to automatically log out a user when the user does not
operate the machine for a specified period of time after logging in.
•On
• Off
When [On] is selected, the time can be set from 60 to 999 seconds, in one sec-
ond increments, using the number keys.
The default setting is 180 second(s).
