Fax Features
94
4
❖ Gateway Settings
Register, change, or delete the gateway used for transmission to IP-Fax. Reg-
ister to use the gateway without using the gatekeeper/SIP server.
• Programming/Changing the Gateway
A Select [Fax Features] using {U} or {T}, and then press the {OK} key.
B Select [IP-Fax Settings] using {U} or {T}, and then press the { OK} key.
C Select [Gateway Settings] using {U} or {T}, and then press the {OK} key.
D Select [Program/Change] using {U} or {T}, and then press the {OK} key.
E Select [*Not Programmed] using {U} or {T}, and then press the {OK} key.
F Enter the Prefix using the number key, and then press the {OK} key.
For documents sent using a gateway to G3 Fax, prefixes can be used. If
the first several digits of IP-Fax number and the gateway- specific prefix
are identical, documents can be transmitted using the registered digits
of the gateway. For example, if both 03 and 04 have been registered as
gateway number while 0312345678 is also specified, documents can be
transmitted via a gateway for which 03 is used as a prefix.
When you wish to use the gateways regardless of the IP-Fax destination
numbers, register only the gateway addresses without registering the
prefix.
G Enter Gateway Address and then press the {OK} key.
H Select [H.323] or [SIP] using {U} or {T}, and then press the {OK} key.
• Deleting Gateway
A Select [Fax Features] using {U} or {T}, and then press the {OK} key.
B Select [IP-Fax Settings] using {U} or {T}, and then press the { OK} key.
C Select [Gateway Settings] using {U} or {T}, and then press the {OK} key.
D Select [Delete] using {U} or {T}, and then press the {OK} key.
E Select the gateway you want to delete using {U} or {T}, and then press
the {OK} key.
F Press [Yes].
Reference
p.107 “Parameter Settings List”
