Message Cause Solution
"Duplex has been
cancelled."
Duplex printing was
canceled.
• Select the proper paper size for
the duplex function. For details
about paper size, see p.33
"Supported Paper for Each Input
Tray".
• Change the setting for "Apply 2
sided" in [System Settings] to
enable duplex printing for the
paper tray. For details about
setting "Apply 2 sided", see "Tray
Paper Settings", Operating
Instructions.
"Error has occurred." A syntax error, etc.,
occurred.
Check that the PDF file is valid.
"Error occurred. Either job
was printed with settings
changed or it was
cancelled."
An error occurred during
printing, but it was skipped.
Check that the data is valid.
"Exceeded max. number of
files to print for temporary/
stored jobs."
While printing a Sample
Print, Locked Print, Hold
Print, or Stored Print file, the
maximum file capacity was
exceeded.
Delete unneeded files stored in the
printer.
"Exceeded max. number of
files. (Auto)"
While using the error job
store function to store
Normal Print jobs as Hold
Print files, the maximum file
capacity for file storage or
Hold Print file management
(automatic) was exceeded.
Delete Hold Print files (automatic) or
unneeded files stored in the printer.
"Exceeded max. number of
pages to print for
temporary/stored jobs."
While printing a Sample
Print, Locked Print, Hold
Print, or Stored Print file, the
maximum page capacity
was exceeded.
• Delete unneeded files stored in the
printer.
• Reduce the number of pages to
print.
3. Troubleshooting
98
