User Tools
225
7
Auto Color Calibration
Copy Mode/Printer
Mode
When the tone of a specific color is strong or the color tone of copies is
different from that of originals, perform the procedure below to adjust
the balance of the 4 basic colors.
A Press the [Auto Color Calibration] key.
B If your machine has the printer option installed, select Copy Mode
or Printer Mode, and then press the [On] key.
C Press the [Print Start] key.
Note
❒ The test pattern is delivered to the copy tray.
D Place the test pattern on the exposure glass, and then press the
[Scan Start] key.
Limitation
❒ You cannot load the test pattern in the document feeder.
Note
❒ Set the test pattern as shown in the following illustration.
❒ To return to the previous setting, and press the [Prev. Setting]
key.
Cat2-5_FM.book Page 225 Tuesday, February 20, 2001 9:27 AM
