Troubleshooting
192
6
B Loading Paper
Reference
For details about paper sizes that can be set, ⇒ P.235 “Mainframe”.
Note
❒ If you want to change the paper size, ⇒ P.207 “Changing Paper Size”.
Non-recommended Paper for Paper Trays
• Folded, curled, creased, or damaged paper
• Torn paper
• Perforated paper
• Paper with conductive or low electrical resistance coating such as carbon or
silver coating
• Thermal paper, art paper
• Thin paper that has low stiffness
• Damp paper
• Wavy paper
• Stapled paper
• Translucent paper
• OHP transparencies
Note
❒ Load paper with the side you wish to copy onto face-down
in the paper trays.
If copies are curled, try turning the copy paper over in the tray. If there is no
improvement, change to copy paper with less curl.
❒ Correct curls in copy paper before loading.
❒ Fan copy paper to get air between the sheets before loading.
❒ When making 2-sided copies, do not load paper in the paper tray to copy on
the reverse side. Use the bypass tray. ⇒ P.49 “Copying onto the reverse side of
paper”.
Cat2-5_FM.book Page 192 Tuesday, February 20, 2001 9:27 AM
