Selecting Modes for Designated Areas
165
5
Selecting Modes for Designated Areas
Reference
The available modes for area editing depend on the area shape. ⇒ P.182
“Combination Chart for Area Editing”.
For functions that cannot be used together in area editing, ⇒ P.182 “Combina-
tion Chart for Area Editing”.
More than one mode can be set for a designated area, however, there are some
limitations, ⇒ P.182 “Combination Chart for Area Editing”. And up to 7 patterns
of modes can be set together.
Note
❒ Up to 20 groups of multiple areas can be edited. All the areas should belong
to groups 1 - 20. You can select up to seven job patterns for at most 20 groups.
After you have set seven patterns, the copier will only allow you to choose the
pattern of a previous group. If you change the settings for one group, it will
change the settings for all other groups with the same job pattern. However,
if you have set a Paint, Color Background, or Frame/ Line, changing the color
in one group will not affect other groups. (Up to 15 colors can be selected.)
❒ The modes that can be set for inside areas are as follows:
• Color/Image Adjustment: Image Density, Color Mode, Original Type, Im-
age Adjustment, Color Adjustment, Color Balance Adjustment
• Color Creation: Color Conversion, Color Erase, Color Background, Paint,
Type Mask
• Image Creation: Outline Image, Shadow Image, Slanted Image, Mirror Im-
age, Positive/Negative
Note
❒ The editing functions are available when specifying area with Frame/Line
mode are Width and Color.
❒ Color/Image Adjustment's default setting:
• Image Density - Manual Image Density
• Color Mode - Black
• Original Type - Text
❒ You can change the default settings. ⇒ P.211 “User Tools”.
❒ Depending on the shapes of the areas, coloring or deleting near the outlines
of the areas might not do well, or the outlines might become uneven.
Cat2-5_FM.book Page 165 Tuesday, February 20, 2001 9:27 AM
