Selecting Modes for Outside Designated Areas
135
4
Selecting Modes for Outside Designated
Areas
Reference
The available modes for area editing depend on the area shape. ⇒ P.146
“Combination Chart for Area Editing”.
Regarding functions that cannot be used together in area editing, ⇒ P.146
“Combination Chart for Area Editing”.
More than one mode can be set. However, there are some limitations, ⇒ P.146
“Combination Chart for Area Editing”.
The modes that can be set for outside areas as follows:
• Color/Image Adjustment: Copy Image Density, Color Mode, Original
Type, Image Adjustment, Color Adjustment, Color Balance Adjustment
• Color Creation: Color Conversion, Color Erase, Color Background, Paint
Note
❒ Color/Image Adjustment default settings:
• Image Density - Manual Image Density
• Color Mode - Black & White
• Original Type - Auto Text/Photo
❒ You can change the default settings. ⇒ P.173 “User Tools”.
❒ The way to set modes is basically the same as for the entire image. For details,
refer to each page.
• To fill an area with a selected color, select Paint.
• Image Density (⇒ P.26 “Adjusting Copy Image Density”.)
• Original Type (⇒ P.33 “Selecting the Original Image Type”.)
• Color Adjustment (⇒ P.106 “Color Adjustment”.)
• Color Conversion (⇒ P.83 “Color Conversion”.)
• Color Background (⇒ P.86 “Color Background”.)
• Color Mode (⇒ P.28 “Selecting a Color Mode”.)
• Image Adjustment (⇒ P.108 “Image Adjustment”.)
• Color Balance Adjustment (⇒ P.103 “Color Balance Adjustment”.)
• Color Erase (⇒ P.85 “Color Erase”.)
• Save Area (⇒ P.133 “Save Area”.)
