Changing the Machine's Settings
146
6
ADF/Sorter
Menu Description
SADF Auto Reset When you set one original at a time in the document feeder, the
Auto Feed indicator lights for a selected time after an original is
fed to show that the document feeder is ready for another orig-
inal. The time can be set from 1 second to 99 seconds.
Note
❒ Default: 5 seconds
Thin Paper Mode Use when changing the type of originals to be fed. Select this
function to avoid damaging thin originals (40 - 52g/m
2
, 11-14
lb) set in the document feeder.
Note
❒ Default: Off
ADF Mixed Sizes By default, you cannot set originals of different sizes at one time
in the document feeder. You can cancel this setting.
Note
❒ Default: Off
❒ If you select [On], the copying speed will be reduced.
❒ When setting different length originals, all originals must be
flush with the back fence of the document feeder.
❒ Smaller size originals might be skewed a little.
ADF Auto Paper Select By default, the Auto Paper Select is selected when you set orig-
inals in the document feeder. You can cancel this setting.
Note
❒ Default: On
FC Copy Sorting You can disable sorting, stacking, or stapling in Full Color
mode to maximize quality of full color copies.
Note
❒ Default: Available (Sorting, stacking, or stapling can be used in
Full Color mode.)
Auto Sort Mode You can have the machine select Sort mode automatically when
you insert two or more originals in the document feeder and
make two or more copies from each original.
Note
❒ Default: On
