User Tools
137
6
Tray Priority You can select the paper tray which will be selected as a default
in the following conditions:
• When the main power switch or operation switch is turned
on.
• When System Reset or Auto Reset mode is turned on.
• When the {Clear Modes} key is pressed.
Note
❒ Default: Tray 1
❒ Tray 2, Tray 3, and Tray 4 are options.
Auto Tray Switch If you load paper of the same size in two or more trays, the ma-
chine automatically shifts another tray when the tray in use
runs out of paper. You can set or cancel this setting.
Note
❒ Default: Off
Interleave Print In this settings On, a print job can interrupt a copy job and vice
versa.
Note
❒ Default: On
Output Tray Prio. (For 3-bin
sorter only)
You can specify a bin to which documents are delivered for
each feature (copy and printer).
A Select [Copy] or [Printer] with the <> keys. Then press the
[OK] key.
B
Select a bin with the <> keys. Then press the [OK] key.
Note
❒ Default:
• Copy: First bin
• Printer: First bin
Display Contrast You can adjust the brightness of the panel display.
Note
❒ Default: level 4
Menu Description
