Changing the Machine's Settings
136
6
Function Reset You can set the function switching time when "Interleave
Print" is Off.
When a print job comes while the machine is copying, after fin-
ishing the copy job the machine will wait for a specified time
before starting the print job.
You can set this time from 10 to 990 seconds (in 10 seconds
steps) or off.
A Select [On] or [Off] with the <> keys.
B When you select [On], enter the time with the number keys.
Then press the [OK] key.
Note
❒ Default: On (60 seconds)
Control Panel Off The machine enters Energy Saver mode automatically after
your job is finished, after the selected time. The time can be set
from 10 to 990 seconds (in 10 seconds steps), or off. In Energy
Saver mode, the panel display turns off.
A Select [On] or [Off] with the <> keys.
B When you select [On], enter the time with the number keys.
Then press the [OK] key.
Note
❒ Default: On (60 seconds)
Auto Timer The machine turns itself off automatically to conserve energy
after your job is finished, after the selected time. This function
called “Auto Off”. The time can be set from 1 to 240 minutes.
Note
❒ Default: 60 minutes
Tray Paper Size Select the size of the copy paper set in the paper tray.
Note
❒ If the specified paper size differs from the size of paper ac-
tually set in the paper tray, a paper misfeed might occur be-
cause the paper size is not detected correctly.
Reference
For details, ⇒ P.131 “To Adjust the Paper Size with the User
Tools”.
Menu Description
