Reception
154
3
Reference
p.45 “Resolution”
p.154 “Memory Reception”
p.155 “Substitute Reception”
p.172 “Printing Options”
Memory Reception
The machine waits until all pages of the document have been received into mem-
ory before printing it.
Important
❒ About one hour after the machine is turned off, all fax documents stored in
memory are lost. If any documents are lost in this way, a Power Failure Re-
port is automatically printed when the operation switch is turned on. Use this
report to identify lost documents. See “Troubleshooting When Using the Fac-
simile Function”, Troubleshooting.
❒ The machine may not be able to receive large numbers of documents or doc-
uments with high data content. In such cases, it is recommended that you
switch off Combine Two Originals, Multi-copy Reception, Reverse Order
Printing, and Two-Sided Printing or install the optional expansion memory.
❒ The machine may not be able to receive fax documents when free memory
space is low.
❒ If free memory reaches 0% during Memory Reception, any further reception
becomes impossible and the current communication is terminated.
Note
❒ Normally this machine receives documents by Immediate Reception. But
Memory Reception is used when Combine Two Originals, Multi-copy Recep-
tion, Reverse Order Printing, or Two-Sided Printing is active.
❒ If you have selected Store for Reception File Setting, received document is
saved on the hard disk and will not be printed. You can print those docu-
ments by operating the machine or a connected computer, as necessary.
