Other Transmission Features
130
2
F Specify the transmission mode from [2 Sided from 1st Page] or [1 Sided for 1st
Page], and then press [OK].
The selected original position and page opening orientation are shown above
the highlighted [2 Sided Original].
To cancel this mode, press [Cancel]. The display returns to that of step
C
.
Select [2 Sided from 1st Page] to send a two-sided original from the first page.
Select [1 Sided for 1st Page] if you want to send a cover letter as the first page.
G Press [OK].
H Specify a destination, and then press the {Start} key.
Note
❒ You can confirm whether both sides were properly scanned using the
Stamp function.
❒ You can program one of the Quick Operation keys with operations for this
function. Using the key allows you to omit step
B
.
Reference
p.143 “Stamp”
“Facsimile Features”, General Settings Guide
E-mail Options
When sending documents, you can set e-mail options using [Sub TX Mode].
Reference
p.61 “Sending to an E-mail Address”
Entering the subject
Allows you to enter a subject for the e-mail document you want to send.
A Place the original, and then select the scan settings you require.
B Specify the sender.
For details about specifying senders, see “Sender Settings”.
