22
7.4.3. Different Auto-Scan Modes
There are two types of Auto-Scan modes:
Scan all computers that are powered on.
Scan only those computers which have been marked to be scanned.
See the section “7.3.1 Scan Mode” to set the Auto-Scan mode.
7.4.4. Auto-Scan Time Interval
The Auto-Scan time interval can be adjusted by pressing <F1> in the OSD main
menu. See the section “7.3.2 Scan Time.”
7.5. Console Lock Using the OSD
If the security mode has been enabled (see the section “7.7 Security Setup”), you can
lock the console by pressing <F3> in the OSD mode to log out of the system. The
Console Lock banner is displayed on the screen.
Figure 23: Console Lock banner
The KVM switch will be locked until a user logs in successfully.
User Name: JERRY
Password:
Figure 24: Login banner
Tip: You can also logout to lock console by using the hot key combination: <Scroll Lock> +
<Scroll Lock> + <H> + <Enter>, when NOT in the OSD mode. See the section “6.7 Console
Lock.”
If you forget your password, the only way to disable the security
function is to type a universal password to unlock the KVM switch.
Contact your dealer or Raritan Technical Support for the universal
password.
