A SERVICE OF

logo

Open as PDF
next previous
21
7.4. Auto-Scan Using the OSD
7.4.1. Enable the Auto-Scan Function
To activate the Auto-Scan function in the OSD mode, press <F2>. The
Auto-Scan banner is displayed to indicate the currently-scanned channel.
─┬── ┬ ──┬──────
│
│ └─ Channel name
│ └────────── Channel number
└─────────────── Current mode
Figure 22: Auto-Scan banner
Tip: You can also activate the Auto-Scan function by using the hot key combination:
<Scroll Lock> + <Scroll Lock> + <S> + <Enter>, when NOT in the OSD mode. See
the section “6.6.1 Enable the Auto-Scan Function.”
7.4.2. Disable the Auto-Scan Function
To quit the Auto-Scan mode, press any key on the keyboard. The Auto-Scan
banner disappears when the Auto Scan stops.