11
Figure 12: Channel selection hot key
Examples:
<Scroll Lock> + <Scroll Lock> + <1> + <Enter>
<Scroll Lock> + <Scroll Lock> + <2> + <Enter>
…
<Scroll Lock> + <Scroll Lock> + <16> + <Enter>
Tip: You can also select a computer in the OSD menu. See the section “7.2 Channel Selection
Using the OSD.”
6.3.2. Channel Switching Using Arrow Keys
To switch to the prior or next channel that is adjacent to the current channel, do
this: first press <Scroll Lock> twice, and then the <Left arrow> or <Right
arrow> key.
To switch to the prior channel:
<Scroll Lock> + <Scroll Lock> + <Left arrow>
To switch to the next channel:
<Scroll Lock> + <Scroll Lock> + <Right arrow>
6.3.3. Channel Switching Using the <ALT> Key
You can also switch to the prior or next channel using the <ALT> key
combinations.
A.
Enable the <ALT> channel switching function:
By default, the channel switching function using the <ALT> key is disabled.
To enable it, press <Scroll Lock> twice, then <ALT> and finally <Enter>. To
disable the function, press the same key combinations again.
