4
Reset Switch:
Press the Reset switch when you want to reset the system. This switch must be
pressed with a pointed object, such as a paper clip or a ball-point pen.
4.2. Rear View
Figure 3: Rear view of the 8-port switch
Figure 4: Rear view of the 16-port switch
4.3. Install a KVM Switch (Single-Tier Installation)
4.3.1. Installation Guidelines
All computers and devices must be turned OFF prior to installation.
Disconnect power cords from the computers implemented with the Keyboard
Power On function prior to installation, or the KVM switch may not work properly.
Computers running Windows 98 must be connected to a KVM switch via PS/2
ports because Windows 98 does not support initial installation through the USB
HID driver.
Old computers may require USB setting adjustment in the BIOS to enable the
USB interface.
There is no guarantee that the EZswitch KVM switch can fully support a USB
keyboard via a USB hub.
4.3.2. Console Connection
Connect a keyboard, mouse and monitor to the console ports on the real panel
of EZswitch (see Figure 5).
