Raritan Computer Switch Manual

A SERVICE OF

next previous

9

4.5. Firmware Upgrade Port

The min-USB female connector on the rear of the EZswitch KVM switch is used for

firmware upgrade. Contact your dealer or Raritan when you need to update the

firmware.

4.6. Rack-Mount the KVM Switch

Figure 11: Rack mounting

This section describes how to attach mounting brackets to the KVM switch for

rack-mounting it on a standard 19-inch rack.

A. Screw the mounting brackets to the sides of the KVM switch (see Figure 11).

B. Mount the KVM switch on a rack.

5. Operation

You can control computers connected to the EZswitch KVM switch by using the

push buttons, hot keys or OSD interface.

 Push button operation:

Press a front panel push button to select the corresponding computer and

operate it.

 Hot Key operation:

See the section “6. Hot Key Operation.”

 OSD operation:

See the section “7. OSD Operation.”