1-8 2001 Pontiac Aztek
Wheelhouse
Replacement
(Front)
Installation Procedure
IMPORTANT: In any area damaged
beyond recognition, space plug weld
holes every 40 mm (1-1/2 in) apart.
1. Drill 8 mm (5/16 in.) plug weld
holes in the service part as
necessary in the locations noted
from the original panel.
2. Prepare all attachment surfaces as
necessary.
IMPORTANT: Prior to refinishing,
refer to the publication GM4901M-
D-01 GM Approved Refinish
Materials for recommended
products. Do not combine paint
systems. Refer to paint
manufacturer’s recommendations.
3. Apply weld-thru primer to all bare
metal surfaces.
4. Position the apron extension.
5. Plug weld accordingly.
6. Clean and prepare all welded
surfaces.
7. Apply the following as necessary:
• Anti-corrosion materials
• Sound deadening materials
• Sealers
8. Refinish as necessary.
9. Install all related panels and
components.
