A SERVICE OF

logo

1-12 2001 Pontiac Aztek
Removal of Damaged
Left Front Rail con’t
5. Locate hole (1), on the inboard side
of the rail. Measure forward 140
mm (5-1/2 in.) and mark the
location. Scribe a straight line on
the rail.
6. Measure forward 10 mm (13/32 in.)
and scribe a second line. The
second line [150 mm (5-29/32 in.)]
is the cut location (2).
7. Make certain all three sides are
aligned. Cut through three sides of
the rail.
8. On the bottom of the damaged rail,
scribe a line from the outboard to
the inboard cut locations and cut
the remainder of the rail (1) from
the vehicle.
9. Remove the damaged section of rail.
150MM
1
2
1
(LEFT OUTBOARD)