A SERVICE OF

logo

1-42 2001 Pontiac Aztek
Panel Replacement
– Rear End
Removal Procedure
1. Remove all related panels and
components.
2. Restore as much of the damage as
possible to factory specifications.
3. Note the location and remove the
following as necessary:
• Anti-corrosion materials
• Sound deadeners
• Sealers
IMPORTANT: Do not damage any
inner panels or reinforcements.
4. Locate and drill out all factory
welds. Note the number and
location of welds for installation of
the rear body opening right and left
lower reinforcements, gaining access
to the rear floor panel.
5. Remove the Rear End Panel.