A SERVICE OF

logo

1-16 2001 Pontiac Aztek
Door Frame
Sectioning—Outer
(Front Hinge Pillar)
Removal Procedure
1. Remove all related panels and
components.
2. Restore as much of the damage as
possible to factory specifications.
3. Note the location and remove the
following as necessary:
• Anti-corrosion materials
• Sound deadeners (1)
• Sealers
IMPORTANT: Do not damage any
inner panels or reinforcements.
4. Cut the panel where sectioning is to
be performed.
5. Locate and drill out all factory
welds. Note the number and
location of welds for installation of
the service part.
6. Remove the damaged Front Hinge
Pillar.
1
1