A SERVICE OF

logo

6
Install the Toner Cartridges
7
Unpack the black toner cartridge
and shake it back and forth.
Press the cartridge toward the left slightly, then
lower the right end, aligning the white tab (3)
with the groove (4) in the drum.
Repeat the process for each toner
cartridge, being careful to match the
toner color to the drum color.
!
Before closing the cover, check to be
sure all the toner cartridge lock
levers (blue) are pushed back as far
as they will go.
Close the cover.
Hold the cartridge in the vertical
position, with the port (1) on the
left and the blue lock lever (2)
on the right.
Magenta
Yellow
Black
Cyan
Hold the cartridge in a
horizontal position and remove
the tape.
Lower the left end of the cartridge into the
image drum closest to the front of the printer,
so that the tube (1) on the drum slides into the
port (2) on the toner cartridge.
Push the lock lever (5) toward the back of the
printer until it stops.
!
To avoid damage to the printheads, be sure to
push the lock lever (5) back as far as it will
go.
A
B
C
C
A
B