23
17
Check the Media Settings (cont.)
!
For information on usable print media,
see the Handy Reference Guide.
Printing Transparencies
Caution! Use only recommended transparencies: 3M
CG3720 or Folex BG67.
Print Path
• Input: Tray1 or Multi-Purpose (MP) Tray
• Output: Rear Exit Only
Transparencies can be loaded in either Tray 1 or the
Multi-Purpose Tray. The printer automatically detects that
transparencies are being used and processes the media
differently from standard paper.
Individual Print Jobs
To optimize the print speed for individual multi-page
print jobs, make the following settings in the printer
driver as you print the job (File ® Print ® Properties [or
Settings, or your application’s equivalent]):
• Source: Tray1 or MP Tray
• Size: Letter
• Type: Transparency
Changing the Default Settings
If the MP Tray or Tray 1 is always loaded with
Transparencies, you should enter the printer menu (see
page 25) and change the settings for the paper path you
are using for the transparencies as indicated below. This
will provide the best printer performance.
Printer Menu Settings: Transparencies in Tray 1
• Tray1 MediaType: Transparency
Printer Menu Settings: Transparencies in MP Tray
• MP Tray PaperSize: Letter
• MP Tray MediaType: Transparency
Printing Labels
Caution!
• Labels must be able to withstand 392°F (200°C)
for 0.1-second
• Labels must cover entire carrier sheet
Print Path
• Input: Multi-Purpose (MP) Tray Only
• Output: Rear Exit Only
Individual Print Jobs
For individual print jobs on labels, change the settings in
the driver as you print the job (File ® Print ®
Properties [or Settings, or your application’s
equivalent]):
• Source: MP Tray
• Size: Letter
• Type: LABEL1 (Heavy) or LABEL2 (Ultra Heavy)
Changing the Default Settings
If you consistently use labels in the MP Tray, enter the
printer menu (see page 25) and change the settings as
indicated below.
Printer Menu Settings: Labels in MP Tray
• MP Tray PaperSize: Letter
• MP Tray MediaWeight: Heavy (LABEL1) or
Ultra Heavy (LABEL2)
