5
5
Remove the Shipping Materials
□ Remove any shipping tape and
packaging.
□ Pull up on the release latch (1)
and open the cover.
6
Prepare the Image Drums
□ Lift out the four image drums
and place them on a flat
surface.
□ Remove the protective sheet (1). Push the
tab (2) in the direction of the arrow and
remove the blanking plate (3) from each
drum.
□ Place the drums back in
the printer, being careful
to match them to the
correct color position.
Black
Cyan
Magenta
Yellow
□ Remove the cardboard shipping
restraint (1) from behind the LED
heads.
□ Pull forward on the blue lever (2),
remove the orange transport lock
(3) from the end of the fuser, then
push the lever (2) toward the back
of the printer.
