2-7
Hardware Setup
The mainboard provides four 184-pin unbuffered PC3200/PC2700/
PC2100 DDR DIMMs and supports the memory size up to 4GB. To operate
properly, at least two DIMM modules must be installed onboard.
Memory
DDR DIMM Slots
(DIMM 1~4)
DDR Population Rules
Install at least one DIMM module on the slots. Each DIMM slot supports
up to a maximum size of 1GB. Users can install either single- or double-sided
modules to meet their own needs. Please note that each DIMM can work
respectively for single-channel DDR, but there are some rules while using
dual-channel DDR (Please refer to the suggested DDR population table on p.
2-8). Users may install memory modules of different type and density on
different-channel DDR DIMMs. However, the same type and density memory
modules are necessary while using dual-channel DDR, or instability may occur.
Memory Speed/CPU FSB Support Matrix
DDR200 DDR266 DDR333 DDR400
FSB400 V V X X
FSB533 V V V X
FSB800 V V V V
