2 Overview
MX3-RFID Reference Guide E-EQ-MX3RFIDRG-A
Chapter 2 “Physical Description and Layout”, describes the function and layout of the
configuration, controls, connectors, keypads and the power supply. The passive cradle and the
battery charging station are included in this section.
Chapter 3 “System Configuration” takes you through the CE .NET operating system setup and
RFID file structure.
Chapter 4 “Wireless Network Configuration” details 2.4GHz radio setup. Configuration for
WEP and WPA is included.
Appendix A “Key Maps” describes the keypress sequences for the QWERTY keypad. “Creating
Custom Keymaps” is included in this appendix.
Appendix B “Technical Specifications” lists technical and environmental specifications for the
mobile device.
Document Conventions
ALL CAPS All caps are used to represent disk directories, file names, and application names.
Menu | Choice
Rather than use the phrase “choose the Save command from the File menu”, this guide uses the
convention “choose File | Save”.
“Quotes”
Indicates the title of a book, chapter or a section within a chapter (for example, “Document
Conventions”).
< > Indicates a key on the keypad (for example, <Enter> ).
Indicates a reference to other documentation.
ATTENTION
Keyword that indicates vital or pivotal information to follow.
Attention symbol that indicates vital or pivotal information to follow. Also, when marked on product,
means to refer to the manual or user’s guide.
International fuse replacement symbol. When marked on the product, the label includes fuse ratings
in volts (v) and amperes (a) for the product.
Note: Keyword that indicates immediately relevant information.
CAUTION
Keyword that indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury.
WARNING
Keyword that indicates a potentially hazardous situation which, if not avoided, could result in death
or serious injury.
DANGER
Keyword that indicates a imminent hazardous situation which, if not avoided, will result in death or
serious injury.
Related Manuals
Available for download from the LXE Manuals CD or the LXE ServicePass website.
MX3-RFID User’s Guide - contains general user information and instruction. An abbreviated
user’s guide (LXEbook – MX3-RFID User’s Guide) is available.
MX3 Cradle Reference Guide – contains technical information, installation and operating
instruction relating to the MX3-RFID Passive Vehicle Mount cradle.
MX3 Multi-Charger User’s Guide - contains technical information and operating instruction for
the MX3 Multi-Charger Plus main battery stand-alone charging/analyzing device.
Integrated Scanner Programming Guide - set up the integrated SE923 or SE955 scanner
barcode reading parameters. The SE923 scanner was replaced with the SE955 scanner in July
2006. Both scan engines are represented in the programming guide.
LXE Security Primer – contains technical information and setup instructions for wireless
network configurations at the access point level.
RFTerm Reference Guide – terminal emulation programming guide.
