Page 9 of 24 Rev: 1/21/2014 7:36 AM
Using KeypadLinc
LEDs
Button Taps
Button LED State
before Tap
Effect of Tap Effect of Double-tap
Toggle
Off
Turn Scene
Turn Scene Members On Instantly
Toggle
On
Turn Scene
Turn Scene Members Off Instantly
Always On
Either
Turn Scene
Turn Scene Members On Instantly
Always Off
Either
Turn Scene
Turn Scene Members Off Instantly
Notes:
1) The connected light(s) will react just like Scene Responders to button taps of MAIN (when using an
8-button KeypadLinc) and On or Off (when using a 6-button KeypadLinc)
2) LED will mimic the on/off status of a dimmer whose Scene level is 100% bright
3) ON button on a 6 button KeypadLinc is an “Always On” button while OFF button is an “Always Off”
button. Other buttons are toggle by default.
Button Tap / Press and Holds
Button Type
Effect of First
Press and Hold
Effect of Subsequent Press and Holds
Toggle
Off
Brighten Scene until
release
Opposite of last Press and Hold
(e.g. if last was brightening, it will dim)
Toggle
On
Dim Scene until
release
Opposite of last Press and Hold
(e.g. if last was brightening, it will dim)
Brighten Scene until release
Local On-Level
The Local On-Level is the brightness that the light(s) physically wired to KeypadLinc will come on at when
turned on locally. The default is 100%.
Local On-Level can be set to any one of 33 settings
32 fixed brightness levels (3% to 100%)
Or “Resume Bright”
• Previous brightness level is stored when turned off and recalled to that level
brightness when turned back on
