A SERVICE OF

logo

Open as PDF
next previous
242 Building a Network Access Control Solution with IBM Tivoli and Cisco Systems
4. Click EAP-FAST Configuration from the Global Authentication Setup
(Figure 7-24 on page 241).
Figure 7-25 EAP-FAST Configuration screen
5. The EAP-FAST configuration, as shown in Figure 7-25, requires you to enter
a lot of fields. Table 7-1 lists all fields and their respective values.
Table 7-1 EAP-FAST Configuration values
EAP-FAST configuration Condition
Allow EAP-FAST Checked
Active Master Key TTL One month
Retired Master Key TTL Three months
Tunnel PAC TTL One week
Client Initial Message <nil>
Authority ID Info cisco
Allow anonymous in-band PAC provisioning Checked
Accept client on authenticated provisioning Checked