A SERVICE OF

logo

Chapter 7. Network enforcement subsystem implementation 241
Global authentication setup
The Cisco Secure ACS supports many types of protocols for securely
transferring credentials from the host to the Cisco Secure ACS for authentication
and authorization.
1. Click System Configuration from the main menu and then select Global
Authentication Setup (Figure 7-24).
Figure 7-24 Global Authentication Setup
2. Make sure that each check box is selected, that Enable Fast Reconnect is
selected, that PEAP and EAP-TLS time outs are set to 120 minutes.
3. Click Submit + Restart.
Note: We highly recommend that you enable all protocols globally. You will
have the opportunity to limit the actual protocol options later when you create
the Network Access Profiles for NAC. If they are not enabled here, they will not
be enabled in the Network Access Profiles.