A SERVICE OF

logo

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.5)
4-92
Resolving the Image Placement problems
Step Procedure
4 Verify if the Vertical Image Position Setting is set correctly or incorrectly.
See the graphic below.
If the white border is on the top edge of the card, adjust the Vertical
value by +2.
If the white border is on the botom edge of the card, adjust the
Vertical value by -2.
a. Click on OK.
b. Run a self-test.
c. If the white border is diminished, continue the adjustment until it is gone.