Pressure Systems, Inc. NetScanner™ System (9016, 9021, & 9022) User’s Manual
www.PressureSystems.com
- iii -
Preface
This manual describes the NetScanner System Intelligent Pressure Scanner modules (Models
9016, 9021, and 9022). It does not cover the 98RK Scanner Interface Rack, model 9816
Intelligent Pressure Scanner, nor models 903x (Pressure Standards/Controllers) and the 9116
Intelligent Pressure Scanner. These products are covered in their individual User’s Manuals.
This manual is divided into seven (7) chapters and several appendices, each covering a
specific topic. They are summarized below:
Chapter 1: General Information describes Models 9016, 9021, and 9022
Intelligent Pressure Scanners and their
various options.
Chapter 2: Installation and Set Up describes the unpacking and inspection of
a module, and its connection to power,
pressure, and a communications network.
Chapter 3: Programming & Operation provides the information needed to
program a module from a host computer
and to get meaningful data from it.
Chapter 4: Calibration describes methods of calibrating a
module.
Chapter 5: Service describes general safety precautions and
maintenance procedures.
Chapter 6: Troubleshooting describes module troubleshooting
techniques.
Chapter 7: Start-up Software briefly describes NUSS software.
Appendix A: All Commands — Quick Reference
Appendix B: Response Error Codes
Appendix C: Cable Diagrams
Appendix D: Module Mounting Dimensions
Appendix E: NetScanner System Range Codes
Appendix F: NetScanner
™
System/9000 Series Products
Appendix G: Binary Bit Map
