Chauvet DMX 60 Manual

A SERVICE OF

next previous

8

3 Quick Start

This section will assume that you are turning the console on for the first time and you have not

assigned or patched any fixtures.

3.1 Set-up

When you turn the console on you will see the following screen on the LCD:

The first thing that we need to do is to assign the fixtures that we have and then patch these and

any dimmers. To do this you need to press the More.. key twice.

This will take you to the following menu screen:

Select the Assign/Patch soft-key. You will see the following menu screen:

The first thing we will do is assign and patch a fixture. Select the Fixtures softkey. You will now

see the following screen:

Select the Edit Key. The screen now shows:

Page01 Step--- Run 1

PageChase

Page+ Live!

Page- More..

Page01 Step--- Run 3

View/Pvw Blackout

Assign/Patch

Load/Save More..

Assign/Patch

Back FixtProfiles

Fixtures AutoPatch

Generics Aux‟s

Fixture 01

←

+ Unassigned

- DMX: --- Edit

Assign Fixture 03

←

< Unassigned >

DMX: --- OK

PageChase will only be visible of there

are memories recorded on the page.