Summit SPW1200P Washer/Dryer User Manual


 
English
Delay Start Button:
This convenient option lets you delay the start of the wash cycle
between 2 to 24 hours.
• Press right arrow ( ) on select button to go to "Delay
Start."
• To choose the number of hours you want to delay the wash, press down
arrow ( ) on select button.
• During this cycle if you want to cancel, you must turn the power off and
reselect the option.
End of Cycle Signal:
The machine will beep at the end of the cycle, indicating that the washing is
complete and washer will turn off automatically.
Closing the Top Lid:
As a safety device, you must always have the top lid closed during the wash
process. If you open the top lid while the wash cycle is on, you will observe the
following.
• The machine will beep.
• The filling and the draining of the water will stop.
• The tub will not spin while the lid is open.
• If the unit is in the wash mode it will stop.
Simply close the top lid and press the start/pause button to resume the cycle again.
14