Summit SPW1200P Washer/Dryer User Manual


 
English
12
Soak Option: This is used for heavily soiled or stained clothes. Here the tub fills
with water allowing clothes to soak with periodic water movement. The cycle is
completed when water is extracted by spinning of the drum. This cycle is
approximately 25 to 35 minutes.
Rinse Option: In this cycle, the machine sprays fresh cold water to remove soil
and odor of the detergent from the clothes. The rinse time varies for each cycle.
Spin Option: In this cycle, the water is extracted from the clothes by spinning of
the drum at the end of the cycle, so your clothes are not as damp when taking out
to dry. The spin time varies for each cycle.
Selecting Water Level:
When you turn the power "ON", the initial water level is set at
"Large" position. The red light will be on at this position. For your
convenience, there are three water level options you can select from
depending on the size of your load: Small, Medium and Large.
If you want to select your desired option at this time, follow the procedure below.
1. Keep pressing left arrow ( ) on select button until the red light of the "Water
Level" button is lit up.
2. Once you are at this setting, use down arrow ( ) to select the proper water level
for your load.