Filter
Top Products
22
M412616
50 Pound (22 kg) Steam Tumblers
Cabinet Finish: Electrostatically applied thermosetting polyester
Cylinder: 37" x 30" (94 x 76.2 cm) perforated galvanized steel with four baffles;
50 pounds (22.7 kg) dry weight (cotton load)
Motor: High Pressure Steam — 1/2 H.P.
(Nonreversing Models) Low Pressure Steam — 3/4 H.P.
Both motors are lifetime lubricated, internal
overload protected
(See below for reversing models.)
Boiler Horsepower: High Pressure Steam (6 Coil) — 4.60 BHP
(154,100 BTU/hr, 72.1 kg/hr, 38,833 kCal/nr.)
Low Pressure Steam (4 Coil) — 3.00 BHP
(134,000 BTU/hr, 62.7 kg/hr, 33,768 kCal/hr.)
Electrical Requirements: Low Pressure
(see nameplate for voltage 230 Volt, 50 Hertz, 1 Phase, 7.0 Amp
of your tumbler)
High Pressure
230 Volt, 50 Hertz, 1 Phase, 7.0 Amp
380 Volt, 50 Hertz, 3 Phase, 3.0 Amp
415 Volt, 50 Hertz, 3 Phase, 2.5 Amp
Air Flow: Low Pressure — 950 C.F.M. at 0.5" W.C. (449 liters/sec. at 1.25 mBar)
High Pressure — 900 C.F.M. at 0.5" W.C. (426 liters/sec. at 1.25 mBar)
Net Weight: 4 Coil Tumbler — 565 pounds (257 kg) (approximate)
6 Coil Tumbler — 580 pounds (263 kg) (approximate)
REVERSING MOTOR SIZES
GAS ELECTRIC
STEAM
HIGH PRESSURE LOW PRESSURE
50 LB.
FAN
1/3 H.P. 1/3 H.P. 1/3 H.P. 1/2 H.P.
CYLINDER
1/3 H.P. 1/3 H.P. 1/3 H.P. 1/3 H.P.