Filter
Top Products
19
M412616
Cabinet Finish: Electrostatically applied thermosetting polyester
Cylinder: 37" x 30" (94 x 76.2 cm) perforated galvanized steel with four baffles;
50 pounds (22.7 kg) dry weight (cotton load)
Motor: 1/2 H.P., lifetime lubricated, internal overload protected
(Nonreversing models) (See below for reversing models.)
Electrical Requirements: 230 Volt, 50 Hertz, 1 Phase, 90 Amp
(see nameplate for voltage 230 Volt, 50 Hertz, 3 Phase, 78 Amp
of your tumbler) 380 Volt, 50 Hertz, 3 Phase, 48 Amp
415 Volt, 50 Hertz, 3 Phase, 45 Amp
Element: 30,000 watts (all voltages) Long life nichrome wire
Air Flow: 900 C.F.M. maximum at .5" W.C.
(425 liters/sec at 1.25 mBar)
Net Weight: 550 pounds (250 kg) (approximate)
50 Pound (22 kg) Electric Tumblers
REVERSING MOTOR SIZES
GAS ELECTRIC
STEAM
HIGH PRESSURE LOW PRESSURE
50 LB.
FAN
1/3 H.P. 1/3 H.P. 1/3 H.P. 1/2 H.P.
CYLINDER
1/3 H.P. 1/3 H.P. 1/3 H.P. 1/3 H.P.