Servis WD1496FGB Washer/Dryer User Manual


 
77 78
T: 0800 0124 382 T: 0800 0124 382
TROUBLESHOOTING
AUTOMATIC DETECTION SYSTEM
Your Washer Dryer is equipped with a built-in fault detection system, which is able to offer
guidance should your machine not operate as expected. The most common error codes are
shown below. If your machine displays a code not shown, consult the Servis helpdesk.
Possible Fault: Pump is damaged, pump filter is clogged or the electrical pump connection
is malfunctioning.
Solution: Clean the pump filter. Contact the Servis helpdesk if the problem persists.
Possible Fault: Your Washer Dryer has an excessive amount of water.
Solution: Turn off your Washer Dryer unplug it and call the Servis helpdesk.
Possible Fault: No water supply or low mains water pressure
Solution: Check that the water supply is turned on, Check that the inlet hose is not kinked
or twisted, Clean the inlet hose and filters
If the problem persists, unplug your Washer Dryer, turn off your water supply and contact the
Servis helpdesk
Possible Fault: The pump is damaged, the pump filter is clogged or the electrical pump
connection is malfunctioning.
Solution: clean the pump filter, check the drain hose for kinks and twists. If the problem
persists contact the Servis helpdesk.