Servis WD1496FGB Washer/Dryer User Manual


 
59 60
T: 0800 0124 382 T: 0800 0124 382
USAGE
Cancelling a Programme
To cancel a running programme at any time:
Turn the programme dial to the STOP position. Your Washer Dryer will stop the current
programme.
Turn the programme dial to any other programme setting to drain the Washer Dryer.
You can now select and run a new programme.
Programme End
Your Washer Dryer will automatically stop when the programme you have selected finishes. It is
safe to open the door and remove your laundry when ‘end’ the
symbol is displayed on the
information screen.
Please Note: Your Washer Dryer has a stage that cools down your laundry at the end of its
drying operation. This is to reduce the risk of you being harmed as you remove the laundry from
your Washer Dryer.
Removing Your Laundry:
1
Wait for the selected programme to finish. This is indicated by ‘end’ and the symbol
of the information screen.
2
Pull the door handle forwards and open the door fully.
3
Remove your laundry; check that all items have been removed from the drum. Any items left
in the drum could discolour items in the next wash or become discoloured themselves.
Figure 23
1
1
Child Lock Buttons
4
Check the drum and door seal for any small articles that may have become dislodged.
5
Leave the door open for a short time to allow the interior of your Washer Dryer to dry. Check
the drum is dry and empty before closing the door.
Child Lock
Your Washer Dryer is equipped with a child lock to prevent accidental operation.
To activate the child lock, press the 2 buttons shown in fig 23 simultaneously for a minimum
of 3 seconds.
If you have successfully selected child lock and ‘keylock activated’ will be displayed on
the information screen.