Filter
Top Products
57 58
T: 0800 0124 382 T: 0800 0124 382
USAGE
To recall saved programme settings at a later time:
Turn the programme dial to ‘MEMORY’.
Press the button to start the programme.
You can change the setting stored in a memory location:
Select the settings you wish to save and press the ‘MEMORY’ button.
‘Overwrite on memory’ will be displayed.
Press the button to store the new settings, or to cancel and return to the main
programme page.
‘Saved as memory’ will be displayed to confirm that the new settings have been stored.
Starting a Programme
To start the selected programme, press the button. The programme you have selected
will be displayed on the screen. The information screen will display the current stage of the
programme such as ‘washing’, ‘rinse’, ‘spin’, ‘drying’ or ‘end’.
‘end’ with the
symbol indicates that the programme has finished and the door is unlocked.
It is now safe to remove your laundry.
Pausing a Programme and Adding Extra Laundry
You can use the button to pause or re-start the selected programme. This function is useful
when you wish to add extra laundry to your Washer Dryer.
If the symbol is displayed on the information screen, you can open the door to add
extra laundry when the programme has been paused.
If the symbol is displayed on the information screen, your Washer Dryer has
progressed too far into the selected programme to add laundry.
Figure 22
Memory Record Function
This feature allows you to store your preferred washing, drying and additional function settings
so that you can easily use them again:
Select the settings that you wish to store and press the ‘MEMORY’ button.
‘Save as Memory’ will be displayed on the information screen (fig 22).
Please Note: You can still make changes to your chosen settings at this point. Press the
button, change the settings to those that you require and press the ‘MEMORY’ button.
Once you are happy with your chosen settings, press the button.
After approximately 5 seconds ‘Saved as memory’ will be displayed on the information
screen.
Your Washer Dryer will then return to the main programme screen.
To start the saved washing programme, press the button, or select another programme.