Filter
Top Products
Leveling the machine
Your machine should be installed on a hard surface – do not install onto a carpet.
For your machine to work quietly and without any vibration, it should it be settled
on a flat, non-slippery and tough ground.
Loosen the plastic adjustment nut.
Adjust the feet upward and downward by rotating them clockwise and anti
clockwise.
When the correct balance has been achieved, tighten the plastic adjustment nut
again by rotating it clockwise.
Never put cardboard, wood or other materials under your machine to try and
stabilise the unit.
Electrical connection
Your washing machine is set to 220-240V and 50Hz.
The mains cord of your washing machine is equipped with a specific grounded
plug. This plug should always be inserted to a grounded socket of 13 amps. The
current value of the fuse should be 10 amps. If you don’t have a suitable plug
socket, please contact 0845 208 8750.
We do not take responsibility for any damage that occurs due to
ungrounded usage.
Operating your machine under low voltage will cause the life cycle of your
machine to be reduced and its performance to be restricted.
For Customer Services, Spare Parts & Manufacturer's Warranty Information please call 0845 208 8750
-7-