Filter
Top Products
Maintenance and Cleaning
When cleaning your machine, ensure that the machine is unplugged and the water
supply is closed off.
Water Inlet Filters
Filters are used to avoid dirt and foreign substances in the water from entering the
machine. These are on the tap and on the ends of water valves along the water inlet
hose of your machine. If your machine cannot intake sufficient amounts of water
despite the tap being open, these filters should be cleaned.
Detach the water inlet hoses.
Remove the filters on water inlet valves using pliers and then clean it with a brush
in water.
Disassemble the filters on the tap end of the water inlet hoses manually and clean
it.
Having the filters cleaned, you can fit them in the same way reversely.
CAUTION: Filters of water inlet valves may be clogged due to a contaminated
water tap or lack of necessary maintenance or valves may be broken down, causing
water to leak into your machine continuously. Breakdowns that may arise because
of these reasons are not covered under warranty.
For Customer Services, Spare Parts & Manufacturer's Warranty Information please call 0845 208 8750
-18-