Filter
Top Products
Cleaning the pump
A filter system is available which avoids threads from your laundry and tiny materials
from entering into the pump during the water discharging operation carried out by
your machine after completing washing. This prolongs the lifecycle of your pump. It is
recommended that you clean your pump filter once in 2 months. To clean pump filter:
Depress the lug downwardly to uncover the pump section of the toe board and
pull it towards yourself and extract it.
Before opening the filter cover, place a towel on the ground immediately in front of
the filter hole to soak up remaining water.
Loosen the filter cover in and allow water to flow out.
Clean the foreign objects present in the filter.
Check whether the pump rotates with your hands.
After cleaning the filter, fit the filter cover by rotating it clockwise.
Fit the pump section of the toe board.
Remember that water will leak if you do not fit the filter cover properly.
WARNING!
As water in the pump may be hot, do not remove the filter cover until the machine
has had sufficient time after a cycle to cool down.
For Customer Services, Spare Parts & Manufacturer's Warranty Information please call 0845 208 8750
-19-