Filter
Top Products
VERTICAL STEAM IRONING
Warning: Steam produced is very hot. To avoid burns and
scalding, never iron or steam clothes while they are being
worn.
˾
To remove wrinkles in cotton or linen, the soleplate can
come in contact with the fabric for optimal results.
˾
For synthetic fabrics, a distance of 4 inches is recommend
to avoid damage to the garment.
˾
For delicate fabrics, we recommend carrying out a test on
an unobtrusive part of the garment (inner seam).
1. Set the temperature control dial and the steam control dial
(located on the control panel) to the maximum position.
2. Hang the garment on a coat hanger and hold the fabric
slightly taut with one hand.
3. Holding the iron in a vertical
position, press continuously on
the steam button (beneath the
iron handle) moving the iron
from top to bottom (9).
AFTER IRONING
1. Press the on/off switch (red light goes out) and unplug.
2. Place the iron on the iron rest.
3. Leave the iron to cool down for approximately
60 minutes.
Once completely cool, you can put your steam generator
away.
Removable water tank
Empty and rinse the removable
water tank before storing (10).
We recommend emptying while not
in use.
CLEANING AND MAINTENANCE
˾
Before cleaning, ensure that the steam generator is
unplugged and that the soleplate and the iron rest have
completely cooled down.
˾
Do not use any cleaning or descaling products for cleaning
the soleplate or the boiler.
˾
Never hold the iron or the base unit under the tap.
˾
Do not place the iron on a metal rest as this could damage
it. Place it on the iron rest on the base unit␣ : it has non-slip
pads and has been designed to withstand high
temperatures.
(9)
(10)