Filter
Top Products
4. Replace it securely on the base
and push down to lock in place
(3).
The steam generator is designed to operate using tap water.
Please review WATER RECOMMENDATIONS section for
additional water information.
TURNING ON THE STEAM GENERATOR
1. Completely remove the power
cord from its storage space
before plugging in.
2. Press on the on/off switch (located
on the front of the appliance) (1)
the green light on the control
panel flashes and the boiler heats
up (2). It will take approximately
2 minutes to heat. The green
“steam ready” light will stop
flashing (4).
UNDERSTANDING THE CONTROL PANEL
˾
Flashing green light␣ : the water is heating up in the boiler.
˾
Continuous green light␣ : steam is ready for use.
˾
Continuous red light␣ : the water tank is empty.
˾
Boiler reset button: to be activated after each refill.
USING YOUR STEAM GENERATOR
Warning: Steam produced is very hot. To avoid burns and
scalding, never iron or steam clothes while they are being
worn.
1. Set the temperature control dial
for the type of fabric being ironed
(5).
Drawing
with
steam areas
to be
integrated
● Synthetics (low temperature)
● ● Silk/Wool (medium temperature)
● ● ● Cotton/Linen (high temperature)
2. The iron temperature indicator turns on.
(1)
(2)
(3)
(4)
(5)