Filter
Top Products
Philips Sound Solutions
PSC805 Aurilium™ Sound Processor Users Guide 17
4. The Philips Sound Agent 2 (PSA2)
The Philips Sound Agent 2 is a Graphical User Interface that provides all the unique and
powerful features of the Aurilium Sound Processor. The PSA2 and Aurilium have the
intelligence to detect the number of speakers connected and the source type of your audio
stream. Based on these factors, the system determines the nature of the audio processing and
spatial algorithms that deliver the best quality sound possible. However, sound quality is
personal and subjective. That is why PSA2 allows the capability to adjust and fine-tune the
audio to suit individual taste.
The following sections provide a detail description of the PSA2 features.
4.1. Basic Interface Operation
To launch and setup Philips Sound Agent 2 control panel, double click on the PSA2 icon in the
System Tray (normally the lower right hand corner of the screen). Figure 10.
Sound Agent 2 icon
Figure 10.
If the PSA2 icon has a red void mark on it, as shown in Figure 11, it means the hardware is not
connected, or the operating system cannot see the Aurilium.
Figure 11
If the Aurilium is connected to the PC by a USB cable and the red void mark still present, refer
to the Trouble Shooting section of this document for information on how to eliminate the
problem.