Filter
Top Products
Programming and storing in
memory
The programmable functions are acti
-
vated using the additional option but
-
tons and the programme selector in
special combinations, which intro
-
duce extra features not marked up on
the control panel.
Programming is carried out in four
steps:
1. Select programming mode
2. Select programmable function
3. Activate or deactivate programmable
function
4. Store the programmable function in
memory
1. Selecting programming mode
AThe machine must be switched off
and the drum door closed. The
programme selector must point to
Finish
.
BPress the additional option buttons
Short
and
Water plus
at the same
time and hold pressed in and:
C. . . switch the machine on with the
I-ON/0-OFF-button.
DLet go of all these buttons.
The indicator light
Main wash
flashes in
the sequence display.
2. Selecting a programmable function
EFor the programmable function re
-
quired turn the programme selector
to the setting given:
–
for A High Water level
to – MIXED WASH Poly/Cottons –
–
for B Water plus system
to – Separate rinse –
–
for C activate i compartment
to – Spin –
–
for D Soaking time
to - WOOLLENS Cold.
– for E Gentle action
to – WOOLLENS 40°C –
– for F Activate top-up rinse for
COTTONS wash
to – DELICATES cold –
– for G Memory-Function
to – DELICATES 30°C –
Programmable functions
33