Filter
Top Products
The wash programme stops and a fault indicator light comes
on.
What to do if . . . Possible cause Remedy
The buzzer sounds and
the CHECK LIGHT Drain is
flashing.
The water outlet is
blocked.
Clean the fluff (drain) filter
and drain pump.
The drain hose has
been fixed too high.
The maximum drain height is
1 m.
The buzzer sounds and
the CHECK LIGHT Water
inlet is flashing.
The water inlet is
blocked
–
Open the stopcock.
–
Start the programme
again.
The buzzer sounds and
the CHECK LIGHT Water
inlet and Drain flash.
The Waterproof sys-
tem has reacted.
Call the Service Department.
One of the following indi-
cator lights is flashing:
– Pre-wash + buzzer
– Main wash
– Rinses 1-2 + buzzer
– Rinse 3
There is a fault. – Press I-ON/0-OFF button
to release it.
– Re-start the programme.
– If the fault indicators oc-
cur again, call the Service
Department.
Three horizontal bars
– – – appear in the display
and the buzzer is sound
-
ing.
There is a fault. – Press I-ON/0-OFF button
to release it.
–
Re-start the programme.
–
If the three horizontal bars
– – – appear again, call
the Service Department.
Problem solving guide
43